Campbell-scientific HMP35C Temperature and RH Sensor Instrukcja Użytkownika Strona 1

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Urządzenia pomiarowe Campbell-scientific HMP35C Temperature and RH Sensor. Campbell Scientific HMP35C Temperature and RH Sensor User Manual Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 16
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 0
INSTRUCTION MANUAL
Model HMP35C Temperature
and Relative Humidity Probe
Revision: 1/99
Copyright (c) 1990-1999
Campbell Scientific, Inc.
Przeglądanie stron 0
1 2 3 4 5 6 ... 15 16

Podsumowanie treści

Strona 1 - INSTRUCTION MANUAL

INSTRUCTION MANUALModel HMP35C Temperatureand Relative Humidity ProbeRevision: 1/99Copyright (c) 1990-1999Campbell Scientific, Inc.

Strona 2 - Warranty and Assistance

HMP35C TEMPERATURE AND RH PROBE8TABLE 8. Wiring for Example 3Description Color CR10(X)Temperature Orange SE 3 (2H)Relative Humidity Green SE 4 (2L)Te

Strona 3 - MODEL HMP35C

HMP35C TEMPERATURE AND RH PROBE9;Turn the HMP35C on.;05: Do (P86)1: 41 Set Port 1 High;Yellow wire (C1);Pause 150 milliseconds, before making the meas

Strona 4 - 3. INSTALLATION

HMP35C TEMPERATURE AND RH PROBE10TABLE 9. Wiring for Example 4Description Color CR10(X)Temperature Orange SE 3 (2H)Relative Humidity Green SE 4 (2L)T

Strona 5

HMP35C TEMPERATURE AND RH PROBE11;Compute the saturation vapor pressure in kPa. The temperature must be in degrees Celsius.;06: Saturation Vapor Pres

Strona 6 - 5. EXAMPLE PROGRAMS

HMP35C TEMPERATURE AND RH PROBE12TABLE 11. Temperature, Resistance, andDatalogger OutputTemperature(°C)Resistance(Ω)Output(°C)-40.00 4067212 -39.18-3

Strona 7 - 6. LONG LEAD LENGTHS

This is a blank page.

Strona 8

Campbell Scientific CompaniesCampbell Scientific, Inc. (CSI)815 West 1800 NorthLogan, Utah 84321UNITED [email protected]

Strona 9 - ENVIRONMENTS

Warranty and Assistance The HMP35C TEMPERATURE AND RELATIVE HUMIDITY PROBE is warranted by CAMPBELL SCIENTIFIC, INC. to be free from defects in materi

Strona 10

1MODEL HMP35CTEMPERATURE AND RELATIVE HUMIDITY PROBE1. GENERAL DESCRIPTIONThe HMP35C Temperature and RelativeHumidity probe contains a thermistor for

Strona 11 - 8. ABSOLUTE HUMIDITY

HMP35C TEMPERATURE AND RH PROBE2FIGURE 1. Error Produced by Polynomial Fit to Published Values3. INSTALLATIONThe HMP35C must be housed inside a radi

Strona 12

HMP35C TEMPERATURE AND RH PROBE3FIGURE 3. HMP35C with UT018 Mounting Bracket and Crossarm andUT12VA Radiation Shield Mounted on a UT30 TowerFIGURE 4.

Strona 13 - 10. MAINTENANCE

HMP35C TEMPERATURE AND RH PROBE44. WIRINGConnections to Campbell Scientific dataloggersare given in Table 3. The probe is measured bytwo single-ende

Strona 14 - 11. REFERENCES

HMP35C TEMPERATURE AND RH PROBE5;Pause 150 milliseconds, before making the measurement, so the;probe can stabilize on the true relative humidity.;03:

Strona 15 - This is a blank page

HMP35C TEMPERATURE AND RH PROBE6Example 2. Sample CR10(X) Program measuring HMP35C Temperatureusing DC Half Bridge with Delay;Measure the HMP35C ther

Strona 16 - Campbell Scientific Companies

HMP35C TEMPERATURE AND RH PROBE7;Measure the HMP35C relative humidity.;07: Volt (SE) (P1)1: 1 Reps2: 5 2500 mV Slow Range;CR500 (2500 mV); CR23X (1000

Komentarze do niniejszej Instrukcji

Brak uwag