Campbell-scientific Sentek TriSCAN® Manual v 1.2a Instrukcja Użytkownika Pobierz pdf (Strona 18)

TriSCAN Manual Version 1.2a

9. Firmly plug the sensor into the connector on the probe rod, ensuring that all the pins are correctly

aligned.

10. Repeat for the other sensors.

Addressing the Sensors

After positioning and securing each sensor in its proper location, every sensor on a probe needs to be

assigned a unique address. The sensor address is set by changing the position of the address link on the

ribbon cable board of the sensor. This address is a means of differentiating between each sensor on the

probe, and can be assigned a numerical value between 1 and 16. The sensor address is not necessarily

related to the sensor position on the probe rod.

Figure 3 below shows the address link in position 5 on the sensor.

Figure 3. Example of sensor address 5

Figure 4 below outlines the sensor address link positions for all the different possible addresses.

Figure 4. Sensor addressing positions

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 60 61

Brak uwag

Campbell-scientific Sentek TriSCAN® Manual v 1.2a Instrukcja Użytkownika Strona 18