Campbell-scientific ENC10/12, ENC12/14, ENC14/16, ENC16/18 Enclosures Instrukcja Użytkownika Pobierz pdf (Strona 25)

ENC10/12, ENC10/12R, ENC12/14, ENC14/16, ENC16/18, PWENC12/14, PWENC14/16, and PWENC16/18

5. Insert the tab on the end of the Screw Threads (FIGURE 4-14) into the

hole at one end of the upper strap.

Enclosure

Mounting Pole

Screw Clamp

Band

Screw Threads

FIGURE 4-14. Securing the enclosure to a pole

6. Pull the strap tight around the pole to determine which hole to insert the

Screw Clamp at the other end of the strap. Insert the clamp into this hole.

7. Use metal shears to remove any excess strap, leaving a small amount for

adjustments.

8. Insert the Screw Threads into the Screw Clamp and tighten, using a

flathead screwdriver or nut driver.

9. Repeat steps 4–7 for the lower strap.

10. Ensure the enclosure is properly grounded through the use of a ground rod

or similar device.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 47 48

Brak uwag

Campbell-scientific ENC10/12, ENC12/14, ENC14/16, ENC16/18 Enclosures Instrukcja Użytkownika Strona 25